What are the disadvantages of using linear light?
The purchase of linear lights is usually done by people who are very discerning and tasteful. At the time of buying these products, check their complete specifications and then proceed to purchase. Knowing and getting information about the disadvantages of linear light is one of these important details. In general, it can be said that the use of linear light does not have any disadvantages and you can buy the most high-quality and suitable products (according to the location and type of installation) with proper advice.
1- But what points should we pay attention to when choosing a linear light?
Purchase and advice from a reputable manufacturer
Line lights are available in different widths in the market and different sellers offer this light with different sizes and wattage. Therefore, we must note that before any drawing, selection and implementation operations, we must receive complete technical information of the lamp including exact dimensions from the supplier we are considering for linear lighting in the design stage, and proceed with the design and execution stages based on that.
If you do not comply with the above point, you may have to make changes in the design, architecture, foundation and substrate, which will lead to financial and time losses in the project.
2. What type of linear lighting exactly do you need?
our linear lighting is produced in different sizes and powers depending on your needs. And you can get the right lamp according to your application.
The first question you should ask yourself is: What is my purpose in using the linear lights?
Are you just providing the main light or are you looking for a decorative and beautiful lamp? Kenaf optical line with high luminous flux is suitable for providing the main light of the space and is available in different widths and types of direct and indirect light distribution in the market.
The use of a two-way linear lamp with indirect and direct light distribution is suitable for lighting work spaces. Also, keep in mind that in linear lights with equal luminous flux and different widths, a larger number of low-width lights may be needed to provide uniform and suitable lighting for your environment.
Listed below are some of the applications of linear lights:
– Use as a decorative lamp and lighting lamp
– Minimal design and modern spaces
– Installation on the ceiling, floor, wall, etc.
– Ability to design flexible lighting
– Adjusting the intensity and amount of light in this category of linear lights
– The ability to adapt to various architectural designs
– Custom light color
– It has the right colors for better visibility
– Long life
– Creating less glare than the general existing products
3. Does the linear lamp need a warranty?
Linear light has a long life, but there are points in the use and installation of linear light line that may prevent you from using the products for a long time. Nissanor company has eased the consumer’s mind by providing an unconditional guarantee. But if you don’t want to get involved in reinstalling your lamps, pay attention to these points:
Not using a standard voltage or current source:
Current and voltage have an important role in the life of the lamp. The electrical flow of your building may suffer during installation for various reasons. You can consult your electrician to avoid any problems.
Use of non-standard diffuser:
Using a standard diffuser in this lamp, the light can be spread evenly with a short distance.
Our recommended diffuser is made of polycarbonate. The use of other options, including plexiglass sheet, makes the lamp heavier and its height higher, as well as the maintenance of the lamps.
5. Indiscriminate use of decorative lights
You might see a beautiful lamp while choosing the lamp you want and think to yourself, it would look great in my room. These decisions may lead to waste of electricity and unnatural lighting of your room in home and office lighting.
To avoid this issue, think carefully while planning your home lighting plan and only purchase items that are both beautiful and functional. Do not try to decorate the room with lighting fixtures.
6. Kenaf optical line with a large width, in the absence of a protective optical layer and unprofessional installation, over time, dust penetrates behind the diffusers of linear lights (optical line) and this dust after a few months – in both on and off states – They are visible and take on a dirty and cloudy appearance. Nissan lights are customized to solve this problem.
7. In the initial designs, the optical line is part of the optical layers, and in the off state, the deep depth of the lights causes their diffusers to become dark and lose their beauty.
8. Modern linear light is in contrast with traditional lighting methods and may not achieve the visual beauty desired by some tastes. Of course, you can still use the combination of several lights in the desired environment.
9. Some manufacturers of linear lights place the light sources at a distance of about 10 cm from the diffuser in order to achieve a uniform light, which causes many problems in the installation of the built-in. Here are some of these problems:
It makes infrastructure difficult and complicated.
The implementation lowers the ceiling to the depth of the lamp.
Most of these infrastructures are implemented before partitions, so the location of the lights is not accurate and has an inappropriate effect on the efficiency of light and the beauty of the space.
Due to the great depth, it is not possible to use built-in in renovation projects.
10. Installation at refraction angles such as 90 degrees, 30 degrees and any other angle, due to the implementation of these angles at the installation site, if the necessary care is not taken into account in cutting the diffuse and profile, it will cause light sources, wires and seams to be seen in the lamp. .
11. The wrong choice of linear lamp due to the stated reasons includes the initial excess costs in the installation such as infrastructure, the cost of construction materials and the time-consuming implementation of the roof and heavy wages for the construction of the roof. Consultation and full examination of linear lights is recommended to solve this problem.
